วันจันทร์ที่ 18 กรกฎาคม พ.ศ. 2554

Polycarbonate Backboards Backboard Basketball Hoop vs other materials – What is the difference?

Polycarbonate Backboards Backboard Basketball Hoop vs other materials – What is the difference?

Polycarbonate Backboards Backboard Basketball Hoop vs other materials – What is the difference?

Posted: 18 Jul 2011 03:20 PM PDT

When shopping for a back wall of basketball, you've probably noticed that there are a handful of different materials, usually made ​​of polycarbonate. However, it is important to know exactly what the different materials and how each compares with others.

Polycarbonate – In most systems of basketball at home, this is definitely the best material to choose from. It 'clear as acrylic, reacts like acrylic, but the decisive Advantage of being several times stronger than acrylic. This means that you can play harder and longer with little fear of the rear wall cracks or breaks. Polycarbonate is a good choice when you buy a basketball for young people who may not be so careful with its back wall.

Acrylic – At the upper end, which kept the acrylic thick enough (or 3 / 8 inch or 1 / 2 inch), then this is a fine material. But if theSystem> you buy is less than $ 500 or so that the material of the rear wall is probably a little 'thinner than that, you should keep the models of polycarbonate polycarbonate cards can do just about everything you can do those Acrylic unless they have a longer life.

Molded plastic parts – you only see this material in the lower-end systems, usually those that cost less than $ 160. This is a marvelous material, if you buy your goal for basketball Children, but has a little 'of disadvantage which vibrate a lot and takes a lot of the action of a basketball. That is, does not make much of a rebound, so it is difficult to make bank shots from angles and things. In general, if you have the option of choosing a model made of acrylic or plastic to go with acrylic.

Glass – you only see this material in high-end systems for basketball, and this is the choice of material, if you really want high quality > System. The glass is in the NBA and college courts used because it vibrates the least of all the materials, and therefore provides better recovery. Glass also has the advantage of not yellow after a few years in the sun. While polycarbonate and acrylic basketball backboards may be a bit 'messy after a couple of years exposed to the sun takes to see the glass is always looking to delete.

In addition to these materials are also some that can be seen only on> Nets Basketball meant for playgrounds and parks.

Steel – If you really want to go for maximum durability, the steel is the way to go. Therefore, the parks to use this material in areas where vandalism is a major concern. The only real concern is that this material has a tendency, an amount that vibrate, which is not exactly ideal for the performance of basketball.

Fiberglass – As the tables in steel, fiberglass models built to be used for a very long time. ThoughFiberglass models are usually used on indoor courts. During that have opened, have developed a sealant time to help the longevity of the basketball backboard.

เขียนโดย ที่

ไม่มีความคิดเห็น:

แสดงความคิดเห็น

สมัครสมาชิก: ส่งความคิดเห็น (Atom)